Haul Off Machine

The DY type haul off machine / tracked plastic profile tractor adopts a dual track traction method and variable frequency speed regulation. The hall off machine mainly matched with plastic extruders and used for the traction of various plastic profile pipes such as plastic pipes, profiles, hoses, etc. It has a wide range of applications and is easy to use.

1. The upper and lower traction arms of the haul off machine are fixed on the fixed seats inside the two vertical plates through a sliding seat. The lifting system at the lower part of the vertical plate is manually rotated by the umbrella gear in the system, which drives the screw to rotate. The screw on the upper and lower traction arms slides in the sliding groove of the sliding seat, so that the two traction arms move relative or towards each other as a whole, playing a role in clamping or releasing.

2. The track drive motor and gear box are both installed in the frame. The motor is connected to the gearbox, transmitting power to the gearbox, and then transmitting it to the umbrella gear on the traction arm through the transmission shaft, thereby driving the active shaft of the traction machine to rotate and the rubber block on the chain to move, playing the role of pulling the pipe.

3. There is an electrical control box on the upper part of the haul off machine, which is equipped with traction arm clamping and releasing buttons and traction speed adjustment knobs.

Haul off machine

Haul off cutting integrated machine

We also make the hauling cutting integrated machine which is suitable for cutting soft material strips; For example, online cutting of automotive soft sealing strips, with an error of 1-3 millimeters. You can see the such haul off cutting machine as below.

Hot Tags: haul off machine, China haul off machine manufacturers, suppliers, Hopper Dryer Machine, plastic mixer, Plastic Mixing High Speed, Continuous Batch Washer, hospital barrier washer, Label Remover