The reason for slow heating speed of large washing machines
Leave a message
In general, washing clothes with hot water will be cleaner than washing with cold water. Large washing machines also need to be heated when washing clothes. The clothes washed in this way are cleaner. As we all know, there are two heating methods for industrial washing machines, one is electric heating, and the other is steam heating. The choice of these two heating methods depends on the situation of your laundry room. So today, regardless of the heating method, we will analyze why industrial washing machines heat slowly.
Fault and Cause Analysis of Steam Heating Type Heating
1. If the steam valve malfunctions and the magnetic valve malfunctions, it cannot work. Solution: Check if the coil of the solenoid valve is burnt out. If it is, replace the solenoid valve.
2. The steam valve blockage of the fully automatic industrial washing machine with steam heating method is a key valve connecting the boiler and the washing machine. If there is a blockage and steam cannot enter the washing machine, it cannot be heated. Solution: Check if the steam valve is blocked. If so, unclog the steam valve or replace it
Reason for malfunction of electric heating industrial washing machine
1. For fully automatic industrial washing machines with electric heating, check if the AC contactor coil controlling the electric heating tube has an AC220V power supply. If there is, the AC contactor is broken, replace the AC contactor.
2. Sometimes, the reason for the electric heating tube is that the fully automatic industrial washing machine takes a long time, and the electric heating tube can no longer heat up, losing its thermal effect. Solution: Replace the electric heating tube.
3. Temperature probe malfunction, temperature probe is a device that senses water temperature. The temperature probe is broken or for other reasons, it cannot be heated. Solution: The temperature probe wiring is disconnected. Check if the wiring is disconnected, and if so, connect the wires properly. If it is broken, replace the probe. Note: Temperature probe malfunction is also applicable to electric heating industrial washing machines.
4. Computer board malfunction. Contact the manufacturer for handling.






